6014200005-V02
Licence to Operate a Boom-Type Elevating Work Platform Course (Boom Length 11 Metres or More)

Home
Courses
Licence to Operate a Boom-Type Elevating Work Platform Course (Boom Length 11 Metres or More)

The fee you pay at TasTAFE will depend on the course you choose and may vary depending on the level of government subsidy available, the cost of delivery, any previous study you have undertaken and/or your personal circumstances.

Our fee estimator will give you an indication of the type of fee you might expect to pay, but is intended as a guide only and doesn’t include other costs associated with your course. Please contact us on 1300 655 307 to confirm your fee.

Are you an Australian citizen, a Permanent resident or a New Zealand citizen?

Back to Building & Construction Trades

Course overview

Back to Building & Construction Trades

Locations

North
Alanvale

North West
Burnie

South
Clarence

Attendance options

Short course

Study type

On-Site

Tuition Fees

Commercial $ 654.00

Additional fees may apply. For more information, see Fees, payments and other costs.

Submit an enquiry

Please note: The course overview is intended as a guide only. Not all courses are available at all locations or through all study types and attendance options. Please check Locations, Dates and Times below or enquire for further information.

Get your licence to safely operate a boom-type elevating work platform and perform high risk work.

This nationally recognised short course is designed to provide you with the underpinning knowledge and skills you need to safely operate a boom type elevated work platform (11 metres or more in boom length).

This two-day short course will equip you with the ability to perform pre-operation checks, and how to set up, operate and shutdown elevated work platforms, as well as learn about site job planning.

On successful completion of this course, you will receive a Statement of Attainment for the unit completed, and be able to apply for National High Risk Work Licence – WP through WorkSafe Tasmania. The licence is valid for five years.

Note– You must be18 years of age and comply with the requirements outlined in the application for high-risk work published by WorkSafe Tasmania and have a satisfactory level of literacy and numeracy.

This two-day short course will equip you with the ability to perform pre-operation checks, and how to set up, operate and shutdown elevated work platforms, as well as learn about site job planning.

Locations, dates & times

Campus	Date	Attendance/Duration	Study type	Apply/Enquire
North
Alanvale	3 Jun 2024 - 4 Jun 2024	Short course Attendance required on campus Monday & Tuesday, 3 - 4 June, 8.00am to 4.00pm, I Block Room I1-25	On-Site	Apply now
Alanvale	23 Sep 2024 - 24 Sep 2024	Short course Attendance required on campus Monday & Tuesday 8.00am to 4.00pm, I Block Room I1-25	On-Site	Apply now
Alanvale	2 Dec 2024 - 3 Dec 2024	Short course Attendance required on campus Monday & Tuesday 8.00am to 4.00pm, I Block Room I1-25	On-Site	Apply now
South
Clarence	16 Oct 2024 - 17 Oct 2024	Short course 2 days, 8am - 4pm F Block Before clicking Apply Now or Enquire Now please make yourself aware of information under the drop-down headings below	On-Site	Apply now
Clarence	30 Oct 2024 - 31 Oct 2024	Short course 2 days, 8am - 4pm F Block Before clicking Apply Now or Enquire Now please make yourself aware of information under the drop-down headings below	On-Site	Apply now
North West
Burnie	20 May 2024 - 21 May 2024	Short course Attendance required on campus Monday & Tuesday 8am to 4.00pm. D block, room D1-50	On-Site	Apply now
Burnie	8 Jul 2024 - 9 Jul 2024	Short course Attendance required on campus Thursday & Friday 8am to 4.00pm. D block, room D1-50	On-Site	Apply now
Burnie	19 Aug 2024 - 20 Aug 2024	Short course Attendance required on campus Thursday & Friday 8am to 4.00pm. D block, room D1-50	On-Site	Apply now
Burnie	11 Nov 2024 - 12 Nov 2024	Short course Attendance required on campus Monday & Tuesday 8am to 4.00pm. D block, room D1-50	On-Site	Apply now

Entry

Participants must be from 18 years of age and comply with the requirements outlined in the application for high-risk work (GF083) published by Workplace Standards Tasmania and have a satisfactory level of literacy and numeracy.

Fees, payments and other costs

Your tuition fees cover the basic materials needed for your course, but may not cover items such as text books, workbooks, uniform, online learning resources or personal protective clothing. Depending on your course, there may also be other expenses that you need to budget for.

For courses undertaken in 12 months or less, you will be invoiced the full course fee (including any other essential fees associated with your course).

*For courses studied over multiple years, your course and other fees will be split over the years of study, with the concession fee being charged on a yearly basis. At the time of enrolment you will be invoiced for the first year’s fees. An invoice will be raised in each subsequent year around the same time as your ‘enrolment anniversary’.

Further information on fees, payments and other costs.

Recognition of prior learning and skills

It makes sense that you should be recognised for the things you already know how to do.

TasTAFE can assess your skills and knowledge based on your previous education, work history or life experience – which may help you to gain your qualification a whole lot faster!

More information on the recognition process is available on our recognition of prior learning and skills page.

Assessment methods

Assessments are designed to help you demonstrate the skills and knowledge you learn in your course and are an essential part of your training. Assessments allow us to confirm that you can perform tasks to the standard required in the workplace, and that you can meet all of the requirements of your course.

While studying at TasTAFE, you may be assessed in a number of different ways. Some common assessment methods include:

completing workplace documents
observations on the job and/or in a simulated assessment environment
quizzes/multiple choice tests
research projects
tests – written or practical
verbal questioning
work samples
written assignments or short answers.

What you will need

There are different requirements depending on the course you are enrolled in.

Generally, it is recommended that you have access to a computer with a reliable internet connection and up-to-date software, including Microsoft Office and Adobe Acrobat Reader. TasTAFE has computers available for student use during normal business hours, at all major campuses.

For classes, please be prepared with standard items such as: pens, notebook or paper, USB.

You may also need to bring specific equipment, tools or personal protective equipment, your teacher will let you know.

For this course, you will need:

You must wear protective work wear (safety boots and Hi-Vis clothing) for the practical assessment. These need to be supplied by the student.

Licensing and other requirements

Successful participants are able to apply for National High-Risk Work Licence (boom type elevated work platform) as issued by Workplace Standards Tasmania under the Work Health and Safety Act 2012.

This Licence is valid for five years and will then require renewal, as outlined below:

You’ll need to renew your licence every five years. WorkSafe Tasmania will post you a renewal notice, to the address you have registered with us.

If you do not receive your renewed licence within 60 days of your application, you’ll need to call WorkSafe.

You cannot perform high risk work while your licence has expired.

Re-assessment is required if you do not renew your licence within this 12 months.

This course does not include the licence fee payable upon successful completion at Service Tasmania (approx. $69.52).

Outcome and units

On successful completion of this course you will receive a Statement of Attainment for successfully completed units.

Below is a list of all core units that TasTAFE offers in this course.

Core units
TLILIC0005	Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Funding may be available for eligible building and construction industry businesses. Visit Keystone Tasmania for course information and eligibility criteria.

Save course

Share course

Funding may be available for eligible building and construction industry businesses. Visit Keystone Tasmania for course information and eligibility criteria.

Save course

Share course

We’re here to help…

At TasTAFE, we understand that everyone's journey is different and sometimes you might need some extra support to achieve your study or career goals.

Whether you are at the very start of your training, returning to study after a long break, or looking to upskill in a specific area, we're here to help you to be successful in your chosen field of study, apprenticeship or traineeship.

Our student support services are available for all students, and aim to provide the support you need to make your learning experience just that little bit easier.

Find out more about what support is available

RTO 60142. CRICOS 03041M.

6014200005-V02 Licence to Operate a Boom-Type Elevating Work Platform Course (Boom Length 11 Metres or More)