Construction/Plumbing/Allied Trades

Short Course Traffic Management

Control Traffic with a Stop/Slow Bat

This course will give road reserve personnel the theory and practical skills to control traffic on public roads and construction work sites for the protection of site workers and the general public. The course is a mixture of class theory and practical, supervised training.

Participants will learn:

  • To plan and prepare the worksite
  • To use a stop-slow bat
  • To operate a radio
  • To coordinate traffic
  • To clean up

Implement a Traffic Management Plan

This course will give road reserve personnel the theory and practical skills to control traffic on public roads and construction work sites for the protection of site workers and the general public. The course is a mixture of class theory and practical live supervised training.

This unit includes traffic management plans for public and private roads, parking areas and restricted access construction sites.

Participants will learn:

  • To plan and prepare the work site.
  • To set out, monitor and close down the traffic guidance scheme using signage.
  • To clean up.

Requirements:

Traffic control at work sites in Tasmania must be carried out in accordance with the AS1742.3. Personnel who undertake operational traffic management activities must complete both of the below units and complete refresher training at a maximum of three year intervals.

  • Control Traffic with Stop-Slow Bat (RIIWHS205D)
  • Implement Traffic Management Plan (RIIWHS302D)

Please Note:
Funding assistance is available from the Tasmanian Building & Construction Training Board (TBCITB) for those that qualify under eligibility criteria. For more information visit tbcitb.com.au.

This course does not require a High Risk Licence but TasTAFE issue a Competency Card.  Renewal is required every 3 years.

Location, Dates and Times

PLEASE NOTE: Register early as places are limited. Maximum number in a group is 10.

Clarence Campus
1 day, 8am to 4.30pm
F Block, Clarence Campus, Bounty Street, Warrane

  • 26 February 2019
  • 25 March 2019
  • 24 June 2019
  • 23 July 2019
  • 20 August 2019
  • 18 November 2019

Alanvale Campus
1 day, 8am to 4.30pm
I Block, Alanvale Campus, Alanvale Road, Newnham

  • 8 February 2019
  • 29 March 2019
  • 10 May 2019
  • 21 June 2019
  • 2 August 2019
  • 27 September 2019
  • 29 October 2019
  • 6 December 2019

Burnie Campus
1 day, 8am to 4.30pm
D Block, Burnie Campus, Mooreville Road, Burnie

  • 28 March 2019
  • 15 August 2019
  • 5 September 2019
  • 30 November 2019

Contact us on 1300 655 307 to register your interest in a course.

Essential Requirements

You must wear protective work wear (safety boots and High Vis clothing) for the practical assessment.
These need to be supplied by the student.

Fees and Payments

2018: $232 per person
Course prices for single employer groups are negotiable.

Suitability

Contact us today to find out if this is the right course for you.

Student Support

TasTAFE’s enrolment and orientation process provides information about our resources, services and support. Further details relating to Student Support Services are available here https://www.tastafe.tas.edu.au/current/student-support/

Outcome

A Statement of Attainment for the units successfully completed, and a TasTAFE Competency Card.

Questions

Get in contact with us

Express your interest

Find out more about this course

Course Units

Find a Course