Metal Trades

Skill Sets Metal Trades

Short courses currently offered:

 

TASMSS0036  Introduction to Welding Skill Set

Learn basic welding skills in manual metal arc welding, gas metal arc welding, gas tungsten arc welding and oxy acetylene welding.

Units of competence offered include:

  • MEM05007C Perform Manual Heating And Thermal Cutting
  • MEM05012C Perform Routine Manual Metal Arc Welding
  • MEM05049B Perform Routine Gas Tungsten Arc Welding
  • MEM05050B Perform Routine Gas Metal Arc Welding
  • MEM13014A  Apply Principles Of Occupational Health And Safety In The Work Environment

Dates and Times

SOUTH
Bender Drive
Duration:  approx. 20 weeks, Wednesday evenings – 5.30pm to 8.30pmc – Information Flyer

  • Dates to be advised

NORTH
Alanvale Campus
Duration:  approx. 18 weeks

  • Next Intake:  2019

NORTHWEST
Devonport Campus 
Duration:   approx. 18 weeks

  • Next course will commence approx. July 2018 (depending on numbers)
  • Venue:  Metal Trades, 20 Valley Road, Devonport
  • Contact 1300 655 307 to register your interest

Contact us on 1300 655 307 to express your interest

Entry Requirements 
Basic literacy and numeracy skills.

Cost:  To be advised


 

TASMSS0037 Basic Aluminium/Steel Fabrication Skill Set

Learn basic Aluminium/Steel fabrication skills in sheet and plate assembly and gas metal arc welding.

Units of competence offered include:

  • MEM03003B  Perform Sheet and Plate Assembly
  • MEM05050B  Perform routine gas metal arc welding
  • MEM13014A  Apply principles of occupational health and safety in the work environment
  • MEM18001C  Use hand tools
  • MEM18002B  Use power tools/hand held operations

Dates and Times

SOUTH
Bender Drive only
Duration:  approx. 20 weeks, Wednesday evenings – 5.30pm to 8.30pm

  • Dates to be advised

Students who complete the Introduction to Welding Processes Skill Set and continue onto the Basic Aluminium/Steel Fabrication Skill Set will receive credit transfer for Perform Routine Gas Metal Arc Welding (MEM05050B) and Apply Principles Of Occupational Health And Safety In The Work Environment (MEM13014A) and may complete the skill set in less time.

2018 Cost:   $481 (Aluminium)

Entry Requirements

  • Basic literacy and numeracy skills

Contact us on 1300 655 307 to express your interest


TASMSS0037  Basic Fabrication Skill Set

Learn basic fabrication skills in sheet and plate assembly and gas metal arc welding.

Units of competence offered include:

  • MEM03003B  Perform Sheet and Plate Assembly
  • MEM05050B  Perform routine gas metal arc welding
  • MEM13014A  Apply principles of occupational health and safety in the work environment
  • MEM18001C  Use hand tools
  • MEM18002B  Use power tools/hand held operations

Dates and Times

NORTH
Alanvale Campus
Duration:  approx. 20 weeks, Wednesday evenings – 5.30pm to 8.30pm – Information Flyer

  • Next Intake:  2019

NORTHWEST
Devonport Campus

  • Next course will commence approx. July 2018 (depending on numbers)
  • Venue:  Metal Trades, 20 Valley Road, Devonport
  • Contact 1300 655 307 to register your interest

Students who complete the Introduction to Welding Processes Skill Set and continue onto the Basic Fabrication Skill Set will receive credit transfer for Perform Routine Gas Metal Arc Welding (MEM05050B) and Apply Principles Of Occupational Health And Safety In The Work Environment (MEM13014A) and may complete the skill set in less time.

Entry Requirements
Basic literacy and numeracy skills

Cost:   To be advised


 

Advanced Welding Certification (Post Trades)

TasTAFE is offering commercial courses in Flux Cored Arc Welding, Gas Metal Arc Welding, Gas Tungsten Arc Welding and Manual Metal Arc Welding – Pipe which meet AS1796.
This is for current engineering trades people

Units of competence offered include:

  • MEM05026C   Apply welding principles  (Theory)
  • MEM05043B  Perform Welds To Code Standards Using Gas Metal Arc Welding Process   (MIG)
  • MEM05044B  Perform Welds To Code Standards Using Gas Tungsten Arc Welding Process   (TIG)
  • MEM05045B  Perform Pipe Welds To Code Standards Using Manual Metal Arc Welding Process   (Stick-pipe)

Dates and Times

Rolling Intake

  • Bender Drive:  Wednesday, 5.30pm to 8.30pm
  • Alanvale:  Wednesday, 5.30pm to 8.30pm
  • Devonport:  Wednesday, 5pm to 9pm

Contact us on 1300 655 307 to express your interest
Duration will depend on the number of units chosen.

Entry Requirements 
Must meet the requirements of AS1796

2018 Cost:  $1500 per discipline

 

Programs may be delivered day or evening and will commence subject to sufficient numbers

Questions

Get in contact with us

Express your interest

Find out more about this course

Find a Course